Specifications

Production: 

Operators:

1  (skilled operator not required.)

Setup time:

Usually, in under 2 minutes:
Enter box style and size /30 sec;
Set knives /1 min; Set side guides / 30 sec.

Rate:

1200 boxes per hour
(Maximum, slot and score box blanks.)

Material:

Corrugated boxboard, single wall E flute to double wall 600 lb. 

(With some limitations, the Model  970B will slot and score most materials that can be sheared and crushed, such as corrugated plastic.)

 Boxes: 

Box Length:

No limit

Box width, RSC:

Minimum:   none;
Maximum:  44” / 1117mm 

(with 22”/560mm knives.  Different knife lengths are available, producing either wider or deeper boxes.  See knife lengths below, under mechanical.
For RSC, max box width = 2x slot length;
for FOL,  max box width = 1x slot length.)

 Box depth:

Minimum, 3” / 76 mm  *
Maximum:
-054, Max box depth 18” / 0.46m
-078, Max box depth 42” / 1.1m
-102, Max box depth 66” / 1.6m
-126, Max box depth 90” / 2.3m
(the above is for machines equipped with 18”/460mm knives, producing an 18" slot, which yields a max 36" wide RSC, or a max 18" wide FOL.  NOTE:  
Longer knives = wider boxes, with less max depth;
Shorter knives = deeper boxes, with less max width;
Max box depth = max blank width – 2x knife length.)

>> For more information on 970 machine width, knife size, and box size relationship and max box sizes, go to  970-Width, Box-Size Relationship   

* Minimum box depth is 3" / 76mm  for all knives 14" or longer.  Knives shorter than 14" restrict the minimum box depth.  For 12" knife, minimum box depth is 7" / 180mm.  For maximum flexibility, most users will prefer a 16, 18, or 20" knife.

Slot width:

Standard, 5/16” / 8mm 
(Other widths upon request.)

Slot length:

From 12” / 305 mm, to 22”/ 560mm

in 2” / 50mm increments
Special lengths available upon request.
Knife length = max slot depth
A longer knife makes a wider box;
A shorter knife allows deeper boxes.
Max box depth = Max blank width – 2 x ( knife length)
>> For more information on 970 machine width, knife size, and box size relationship and max box sizes, go to  970-Width, Box-Size Relationship   

Box Blanks:

Blank length:

Min, 12” / 305 mm
Max, No limit 

Blank width:

Min, 6.5”  / 165 mm  (smaller width-optional) 
Max,       970-054,   54” / 1.37m
               970-078,   78” / 1.98m
               970-102,  102” / 2.59m
               970-126,  126” / 3.20m

Machine Size and Weight:

Machine Height:

48”  /1.22m
Table /working surface height, 36” / 0.92m

Machine Width:

970-054:    88” / 2.2m
970-078:  112” / 2.8m
970-102:  136” / 3.4m
970-126:  160” / 4.1m

Machine Length:

48” / 1.2m
(infeed table / feeder  folded down)
84" / 2.1m
(infeed table/feeder up, in position)
(Does not include: conveyor or catcher.)

Ready to run: About 20 ft / 6.1m
 - includes: infeed table/feeder, conveyer and catcher in position; with 6ft / 1.8m box blank in positon; does not include infeed material support for longer box blanks.

Weight -

boxmaker

(crate #1):

054:

078:

102:

126:

With feeder add:

With punch add:

Weight - infeed material support, conveyer and hopper (crate #2):

   NET,

    lb  /  kg

3500 / 1588
3750 / 1701
4000 / 1814
4250 / 1928

  500 / 226

  500 / 226

 400 / 180

 CRATED,

   lb   /  kg

4000 / 1814

4250 / 1928

4500 / 2041

4750 / 2155

  500 / 226

  500 / 226

(Crate #1)

  600 / 272

(Crate #2)

Requirements:

Electric:

20a @ 220v, 3 phase, 50 / 60 hz

or

10a @ 380v, 3 phase, 50 / 60 hz

Other power supplies as requested

Compressed  Air:

80-100 psi, Negligible volume
(less than 1 hp compressor required)

Compressed  Air, feeder:

80-100 psi, 8CFM/170 L/M free air
(5 hp compressor required)